industry news | Luview

Top 3 Reasons Why The Rearview Camera Won’t Work

Mei 29, 2018/dalam berita industri/oleh 卢维尤

If you have a rearview camera that is not working, you will not be alone. There are hundreds of people who have gone through such problems. One of the most commonly asked questions, is that “My Rear View Camera Is Not Working- What Is The Reason?” One of the most important safety tools for the driver is the kamera pandang belakang. This will help you protect other drivers and pedestrian. The rearview camera works automatically when you change the gear into the reverse position. In today’s world, having a backup camera is crucial for safety on the road.

Sometimes, the camera stops working, causing you a lot of trouble. The problems with your camera range from small issues to serious ones that require replacement of the camera. If your camera is not working properly, you will have to resolve the issue. Before doing so, you need to know what is causing the problem. In this article, we have highlighted top reasons why the camera doesn’t work.

Read on to know the common reasons.

Dirt and Grime

One of the most common reason is dirt, this causes the image to be fuzzy and grainy. The camera gets dirty that is close to the ground. Another reason that might lead to a dirty camera is rain and mud. Fixing this kind of problem is not difficult, all you have to do clean the camera. You can use a clean cloth to get rid of the dust and dirt. It is advised to use lint-free cloth this will prevent the lens from scratching.

Blown Fuse

Another reason that might cause problems in the functioning of your camera is the blown fuse. When you put the gear into the reverse position and the camera doesn’t show up, it is because of the blown fuse. In order to resolve this problem, you will have to figure out the location of the fuse. In some vehicles, the fuse is situated under the dash or even under the steering wheel.

Furthermore, once you have located the fuse, you have to determine the fuse that goes with the backup camera. Before replacing the fuse, you will have to make sure it is the cause of the problem.

Lose Wiring

One of the problems that most people encounter is that the monitor doesn’t display the image. The reason behind this is a fault in the wiring system. This problem occurs when the wiring gets lose. To fix this problem, you will have to figure out the electronic system the cable is connected to. The manual of your car will help you resolve this problem. It is easy to solve this issue as you will just have to make sure the wiring is secure.

There you go; this answer the question, “why my rear view camera is not working, what is the reason?” This information will help you resolve the problem as the problem will not be as complicated as it seems. When fixing the issues, you need to be diligent to avoid any other serious problems.

How To Clean Rear View Camera ?

Mei 28, 2018/dalam berita industri/oleh 卢维尤

Are you wondering how to clean rear view camera? The rear view cameras are an essential tool for the drivers in today’s advanced world. The backup rearview cameras enable you to reverse your car without having to worry about damaging your vehicle or any other object. It is a great way to keep everyone on the road safe. For this purpose, it is crucial for the camera to be clean so they can work efficiently. If the rear view camera is not clean, it might cause you several problems.

This is because you will not be able to see clearly as the image quality might be grainy or fainted. You must keep the rearview camera maintained to significantly enhance safety. This is why we have talked about how to clean rear view camera.

Read on to know the way to clean the backup camera.

Why Rearview Camera Gets Dirty?

The rearview cameras are located either on the bumper or the license plate. This is the reason why they are designed to be sturdy and durable. However, the camera can get dirty thanks to the debris, dust, mud, rainwater, snow, and dirt. This is because the camera is closer to the ground that makes it more to prone to pollutants. So, it is recommended to clean your camera regularly to improve your visibility when driving.

Cleaning Your Rearview Camera

There are various ways to clean the lens of your backup camera.

An easy and simple method to clean your camera is to wash lens during a regular car wash.
You can use dirtproof and waterproof products that help in slowing down the accumulation of grime.
Residual oil remover is a great way to maintain the camera lens in optimal condition.
The camera that is pre-installed in the car will require less maintenance. In snowy or rainy season, you must clean the camera before you drive.
Most of the experts advise using clean microfiber cloth in order to clean the camera. It will be better if you use a lint-free lens cleaner for keeping the camera scratch and dirt-free.
In case you need to clean your rearview camera often, it means that the camera is too close to the ground. You will have to change the position of the camera.
In winters, it is important to take special care of the camera. The reason is that the electronics start to malfunction in extreme weather. For instance, in extremely cold weather, LCD becomes slower that will display a distorted image. To have a clear image, the system needs to warm up. So, you should be prepared for dealing with such situations to prevent inconvenience.
Ice and frost might gather around the camera that will interrupt the normal function of the camera. This is why you need to have a cleaning kit in your glove compartment. It will help you quickly address the issue as soon as it occurs.

Overall, here is the best answer to the question, “how to clean rear view camera?”. The backup camera is a wonderful way to stay safe on the road.

3 Advantages of Using a Rear-View Camera for Motorhome

Mei 28, 2018/dalam berita industri/oleh 卢维尤

A motorhome is a vehicle with a caravan attached to it. People tend to live and move around in Motorhomes. People who live in their vehicles want to feel safe and they want to minimize the chances of accidents. The best way to do this is by buying a rear-view camera for your Motorhome and installing it. Rear-view cameras will help increase your visibility and they can help you see all that is in your way.

The Advantages of Using Rear-View Cameras for your Motorhomes:

1) These rear-view cameras for your motorhome can be temporarily installed. They can be taken out if you change your vehicle and can be then applied to the new one. They are all mostly user-friendly and come with easy instructions. You would not need a professional to install your camera as they are pretty easy to install and run.
2) Rear-view cameras for your motorhome are the easiest way to have full visibility. You will be able to see even your otherwise blind spot. You cannot use a rearview mirror from a motorhome because of its size and shape so installing a rear-view camera is the only way you can see behind you.
3) You will have a 120° view if you install a camera. You will be able to even see an infant or the smallest of things behind you. They will also help you when you are reversing as you will be able to see the gap between you and other things.
These were three of the advantages of using rear-view cameras.

Why you should choose to buy your rear-view cameras from Luview.

Luview has been in the market of rear-view cameras for more than 13 years. They have two types of cameras available, wireless rear-view cameras for your motorhome or the ones with wires. All their cameras are easy to install and they all are approved by the users and the market. They will help you in choosing the best rear-view camera for your type of vehicle. The products offered by Luview are affordable and they have all the qualities being offered by their competitors.

Few of the best Luview rear-view cameras for your motorhome are as follows:

1) 480p Rear-View Camera JY-6731
This rear-view camera is an infrared LED camera with 480 pixels. The audio in this camera is optional, it is up to you if you want the audio or not. It has a sharp ¼ CDD sensors and forty-five feet night vision. This camera is the best rear-view camera for your motorhome as it can work in extreme weathers too.

2) Best Car Reverse Camera JY-365
This camera comes with a stainless steel bracket to save it from damage and protect it. This camera does not need a lot of maintenance and has a view of 170°. The camera is an infrared LED IR camera and is water and dust proof. It is the perfect rear-view camera for your motorhome.

Our Final Take:
You should research more on the importance of rear-view cameras for your motorhome. We hope you found this article informational. If you learned something from this, then please do comment and share.

Radar undur atau kamera undur? Yang mana satu lebih baik?

Mei 17, 2018/dalam berita industri/oleh 卢维尤

When you are consider buying a car, regardless of the model you want to purchase, thousands of US dollars or tens thousands of US dollars, there is still some car models are without parking sensor ( same as reversing radar ) and reversing camera.Fortunately, both products can be easily purchased online or at auto parts store. Today, we are going to discuss: Is it better to use reversing radar or is it better to use reversing camera ?

First of all, let’s talk about reversing radar, since it is being called radar, then its working principle is of course learned from bats. The radar probe emits ultrasonic waves. Once the ultrasonic waves hit obstacles, they will be reflected back. Then the system will calculate the distance between radar probes and obstacles. Then the driver is given different frequency alarms by the system according to the distance to help the driver better determine the parking position.

In actual operation, changes in light have no effect on the reversing radar. Even if it is raining heavily, it will not affect the reversing radar too much. Unless the probe is covered by a piece of mud, it will lead to false alarms. Of course, these premise is that you have bought a good parking sensor. Some reversing radars have virtual image display, and there are distance broadcasts, which can effectively help the driver reversing. However, some reversing radars only have alarms. For car owners who cannot see the blind spots, they cannot fully believe the reversing radars, because low position stones ( lower than the , iron pillars, or snow pile maybe ignored by the sound waves and the radars will keep silence.

In other words, objects that are shorter than reversing radars have the opportunity to escape from its detection. If you continue to reverse the car at this time, you may encounter obstacles. And some reversing radar with poor respond ability, it will take a certain reaction time before the alarm, so the speed must be slow when reversing

The reversing camera is equivalent to a real-time video monitor used when reversing. It is more vivid than the reversing radar. No matter whether it is a low rock or a thin iron pillar, they can’t escape from its eyes. For living creatures that move, it allows drivers to better understand the situation behind them. With reversing camera system, kids playing behind the car can easily being found and drivers can easily avoild of unnecessary accidents.

In actual operation, reversing camera performance has a great relationship with the reduction degree of the camera. For example, a reversing camera with a wide angle may cause the scenery on both sides of the screen to be distorted, thus affecting the correct judgment of the driver. Of course, there are some good reversing camera system, they have been designed with predict function, such as when you turn the steering wheel, the virtual line in the screen will changes according, so that the driver can better determine whether to continue reversing, or forwarding to re-adjust the car body position. However, the reverse camera also has its drawbacks. When the camera lens is covered with water or other dirt, or when bad weather (such as heavy rain) is encountered, it cannot work properly.

Saying for a long time, it is difficult to pick which one is better from the two. After all, their market prices are not much different, and the installation steps are almost the same. They also have their own advantages and disadvantages. So the final suggestion is if you feel that you can reversing easily, it doesn’t matter if you choose one or the other. However, if you still have problems reversing to some spaces , then we would suggest you to to install the both types. Actually, reversing radar and reversing camera are like the ears and eyes when reversing. Better not to rely on one alone, better using them together to complement one another.

Bagaimana cara membersihkan sensor parkir lori?

16 Mei 2018/dalam berita industri/oleh 卢维尤

Adakah anda tertanya-tanya bagaimana untuk membersihkan penderia parkir lori? Sensor parkir lori adalah peranti penting bagi pemandu. Dahulu, orang menghadapi kesukaran memarkir kenderaan mereka. Dalam dunia moden hari ini, memarkir kenderaan anda tidak lagi menjadi tugas yang menakutkan. Terima kasih kepada penciptaan sensor parkir lori. Ia menggunakan gelombang ultrasonik atau elektromagnetik untuk mengesan objek berhampiran kenderaan anda. Jika anda tidak membersihkan lori anda, dari masa ke masa, habuk boleh terkumpul pada sensor anda. Sensor boleh menghadapi masalah berfungsi dengan betul jika ia tidak bersih. Ia boleh menyebabkan kerosakan pada lori anda atau bahkan kemalangan. Dalam artikel ini, kami telah menyenaraikan cara untuk membersihkan sensor parkir lori anda.

Sebelum meneruskan pembersihan sensor parkir lori anda, anda perlu mengetahui mengapa ia penting untuk membersihkan sensor parkir lori.

Pentingnya mempunyai sensor parkir lori yang bersih

Untuk memastikan sensor berfungsi dengan betul, anda mesti membersihkannya. Oleh kerana sensor menggunakan gelombang ultrasonik, kotoran, salji atau bahkan lilin boleh mengganggu operasinya. Akibatnya, sensor mungkin tidak berfungsi dengan betul. Ini boleh menyebabkan kerosakan pada lori anda dan lori orang lain. Anda akan menghadapi kesukaran untuk memarkir kenderaan anda dengan betul.

Membersihkan Sensor Parkir Lori Anda

Terdapat pelbagai benda yang boleh terkumpul pada sensor parkir anda. Apabila anda mengilat atau memoles trak anda, sebahagian lilin akan memasuki sensor parkir yang dipasang pada trak anda. Ini akan mengganggu fungsi sensor anda, menyebabkan kesukaran dalam memarkir dan pelbagai akibat berbahaya lain.

Selain itu, habuk dan serpihan juga boleh terkumpul di sekitar sensor. Ini akan menjadikan sensor anda kotor dan ia tidak akan berfungsi dengan betul. Oleh itu, adalah penting untuk membersihkan sensor parkir anda.

Barang-barang yang anda perlukan

semburan pembersih lori (mesti mesra cat)
cucuk gigi
Kain mikrofiber

Langkah-langkah

Yang perlu anda lakukan hanyalah menyembur cecair pembersih pada sensor. Kemudian, anda perlu membersihkan sisi sensor menggunakan pencungkil gigi. Ini akan mengeluarkan kotoran dan lilin dari sisi-sisi tersebut dan anda boleh membersihkannya dengan kain mikrofiber.

Membersihkan Salji dan Ais

Pada musim sejuk, ais dan salji terkumpul di sekitar sensor sehingga menyumbatnya. Sistem akan berhenti berfungsi dengan optimum dan mungkin terhenti sepenuhnya. Untuk membersihkan sensor, anda boleh menggunakan pencuci automotif ringan. Ini bagi memastikan cat lori anda tidak rosak. Anda perlu berhati-hati semasa membersihkan sensor kerana garam boleh menyebabkan kerosakan. Anda boleh menggunakan tuala atau kain lap kering dan bersih untuk membersihkan sensor.

Pastikan ia dibasuh secara berkala.

Satu lagi cara hebat untuk memastikan sensor parkir sentiasa bersih ialah dengan mencuci lori anda dengan kerap. Ini akan membantu mengekalkan sensor lori anda dalam keadaan terbaik. Ia adalah cara mudah untuk memastikan lori anda bebas daripada ais, percikan jalan, kotoran dan salji.

Pada akhirnya, mempunyai sensor yang bersih adalah penting untuk keselamatan anda di jalan raya.

Faktor-faktor yang perlu dipertimbangkan sebelum membeli sistem kamera pandang belakang tanpa wayar

Mei 10, 2018/dalam berita industri/oleh 卢维尤

Are you planing to buy and install rearview camera system for you own can or other vehicle, to improve reversing and parking safety and efficiency ? If yes, you definitely need help on how to choose the right rearview car camera system. Rearview camera system can be divided into wired rearview camera system and wireless rearview camera system ( also being called WiFi rearview camera system).

For individual buyer or if you want to DIY rear view camera system, you’d better buy wireless rear view camera system. In fact, even the wireless rear view camera system still have a lot of wires, they are called wireless because they don’t have the video cable you need to wire between the camera and the lcd display, which is the most difficult part for DIY rearview camera system, becuase it cost you a lot of time to route the video cable throughout the vehicle. Instead, the wireless rearview camera system has a digital singal transmitter with the camera and a singal receiver with the lcd video display.

Other than that, wireless rearview camera system and wired rearview camera systems are much same. They both need a power source to run the car backup camera , they both are usually wired to the backup lights so that the system activates when the vehicle is in reverse only.

Wireless rearview camera systems work best when the distance between the transmitter and receiver is the shortest. That means that they usually work better on smaller vehicles than on large SUVs or trucks.

Factors you should pay attention to when purchase a wireless rearview camera system

Water Resistance
The heart of any rearview camera system is the camera itself. The reverse camera you choose should have a waterproof rating at least IP67, IP68 or IP69K will be better.

Night Vision
The camera should still work very well even at dark night, this functions usually requires the camera with built in infrared lights.

Mounting
There are many types of cameras with a variety of mounting methods, but the easiest method for installation are the license plate bracket models. They prevent you from having to drill more holes to mount the camera.

Height Tiltable
Make sure that a camera mounted to the license plate bracket can be height adjusted via tilting or you may be stuck with a view to the rear that isn’t ideal.

Viewing Angle
Viewing angle is important when it comes to any car camera. Make sure the camera you choose has at 170 degree or better angle so that you can capture the whole area behind your vehicle.

Distance Detecting Line
Some cameras come with a built-in distance scale line display to help with backing up your vehicle and it is a really nice feature to have.

Video Monitor
Video monitor sizes for back up cameras have gotten larger over time. A 7 inch lcd video display definitely provides a better picture of what’s behind you than a 3.5 inch display, but it also occupy a lot of space on your dashboard. But think about where you can put the display before you made the final decision. Remember that you only use it when you back up and otherwise it’s just going to mounted to your dashboard or windshield, and take up a lot of space. For any WiFi backup camera system you buy, the monitor should activate automatically when it receives a video signal and the signal from the rear view camera should have the first priority over other possible inputs.

Can we use rear view camera or backup camera on driving test ?

Mei 7, 2018/dalam berita industri/oleh 卢维尤

Kamera belakang ( rear view cameras ) have become standard features in cars, almost 90% of car you can see running in the street have equipped with the rear view camera system, the rear view cameras usually mounted on the rear part or side part of a car, and a lcd monitor mounted on the dashboard or mirror monitor replaced with original rear view mirror. And according to US law, car manufacturer are required to install backup cameras in all new vehicles from 2018. So there comes this question, can we use rear view camera or backup camera on driving test ?

What is the purpose of driving test ?

The whole purpose of giving a license test is testingyour ability to keep others and yourself safe on the road using basic functionality of a vehicle. Especially, through the parallel parking test, the examiners can determine whether a new driver has the necessary vehicle control and hand-eye coordination before they go on the open roadway, and then they decide whether or not give him a driving license.

Actually, there is no law forbidden usage of rear view cameras during driving test, most time it depends on the examiner. However, most examiners would not allow you to use rear view cameras during parallel parking, they would cover the rear view camera with paper or tapes. In my opinion, we can use rear view cameras, but we should not wholly reply on rear view cameras. As you can see from the first paragraph, not all vehicles equipped with rear view cameras, there maybe times we need to borrowing other’s vehicle that may not have a rear view camera; and some times rear view camera may fails. I know parallel parking maybe a bit hard for new driver, but as long as you are careful and take more practice, you can master it quickly.

Bagaimana memilih perekod pemanduan berkualiti?

5 Disember 2017/dalam berita industri/oleh 卢维尤

Jika anda telah memilih jenama yang boleh dipercayai untuk membeli a perekod pemanduan, Anda perlu menumpukan perhatian kepada menganalisis beberapa parameter produk sebelum membeli perekod pemanduan, seperti sudut rakaman, resolusi gambar, format mampat, penimbalan, dan kita juga perlu tahu sama ada video boleh ditutup secara manual; sama ada ia boleh merakam video dengan normal dalam situasi kecemasan; sama ada ia tidak mengganggu produk elektrik lain; dan sama ada pembelian boleh dibuat dengan kad, dan sebagainya.

Sudut rakaman

Sudut rakaman adalah 100 darjah untuk rakaman pemanduan biasa, yang pada dasarnya sudah mencukupi untuk merakam kedua-dua lorong di sisi kenderaan. Sudah tentu, sudut yang lebih besar adalah lebih baik, tetapi kosnya juga lebih tinggi.

Resolusi gambar

Secara amnya, resolusi video ialah 1280 * 720, yang boleh menjamin rakaman nombor pendaftaran di hadapan dengan jelas, manakala nombor pendaftaran lorong sisi akan sedikit kabur dalam perekod pemanduan. Selain itu, keupayaan fotosensitif cip SMOS dalam perekod pemanduan dan kualiti kaca lensa berkaitan dengan kesan rakaman pada waktu malam.

Format mampat

Kebanyakan perakam pemandu menggunakan format pemampatan H.264. Tanpa format pemampatan yang baik, ia akan menyebabkan kehilangan bingkai, yang memerlukan kapasiti storan lebih besar dan kelajuan bacaan kad memori yang lebih tinggi. Saiz fragmen 1 minit pada resolusi 720p dengan pemampatan H.264 adalah sekitar 60MB. Dari segi pemandu, adalah berguna untuk memilih selang dan jumlah rakaman yang munasabah bagi menyediakan bukti kemalangan tepat pada masanya, dan 1 minit sebagai selang masa adalah sesuai.

Cache

Jumlah cache yang lebih besar boleh menghasilkan video yang lebih lancar dan keserasian kad memori yang lebih baik.

Video kecemasan

Jika terdapat video penting yang ingin anda tinggalkan, dan perekod pemanduan juga perlu merakam video seterusnya, ini menyebabkan video penting akan dipadam pada masa akan datang. Untuk mengatasi situasi ini, terdapat reka bentuk video kecemasan untuk menyimpan video khas, supaya jika anda hanya menekan satu kekunci secara manual, anda akan memaksa video itu disimpan tanpa dipadam secara automatik apabila kad penuh. Rakaman kecemasan automatik menggunakan sensor graviti. Ia akan secara automatik melindungi video ini daripada ditimpa atau dipadam semasa memantau gegaran kuat pada kereta. Fungsi ini berguna sekiranya kenderaan bertembung.

Langkah pelindung

Untuk mengurangkan kos produk, produk tiruan sering kali tidak mengambil sebarang langkah pelindung dan tidak menjalani ujian ketat ke atas produk mereka, yang akan menyebabkan produk ini mengganggu beberapa peralatan elektronik seperti navigasi GPS, kawalan jauh, audio, meter tekanan tayar dan komputer pemanduan, dan sebagainya.

Sama ada membeli dengan kad

Video perekod pemanduan dengan gambar definisi tinggi sentiasa mempunyai saiz yang besar sehingga ratusan MB setiap minit, jadi terdapat keperluan ketat untuk kelajuan membaca kad memori, dan saya menasihatkan pemandu membeli kad berkualiti tinggi kerana perekod pemanduan dengan kad berkelajuan rendah mudah rosak.

Shenzhen Luview adalah pengeluar di China yang mengkhusus dalam penyelidikan dan pembuatan sistem kamera kereta berkualiti tinggi dengan harga kompetitif. Kami sentiasa berpendapat: kualiti didahulukan, pembangunan berasaskan keikhlasan. Jika anda berminat dengan produk kami, sila hubungi kami melalui e-mel: sales@luview.com.

Apakah sistem kamera pandangan belakang kereta CCD?

4 Disember 2017/dalam berita industri/oleh 卢维尤

Pertama sekali, saya rasa jika anda ingin tahu tentang CCD kamera kereta pandangan belakang Sistem, anda perlu memahami apa itu CCD dan apa itu kamera pandangan belakang kereta CCD, kemudian anda akan lebih memahami tentang sistem kamera pandangan belakang kereta CCD.

Apakah itu CCD? CCD (Charge-Coupled Device) ialah peranti semikonduktor yang boleh menukarkan imej optikal kepada isyarat digital. Bahan fotosensitif yang kecil pada CCD dipanggil piksel, dan lebih banyak piksel pada CCD bermakna resolusi gambar yang lebih tinggi. Terdapat banyak fotodiod yang disusun pada CCD, yang dapat mengesan cahaya dan menukarkan isyarat cahaya kepada isyarat elektrik, kemudian CCD menukarkan isyarat elektrik kepada isyarat gambar digital dengan memperbesarkan sampel luaran dan data analog.

Apakah kamera CCD? Kamera CCD memfokuskan imej objek pada cip CCD melalui lensa, kemudian CCD mengumpul cas yang sepadan mengikut intensiti cahaya; cas-cas ini akan ditukar menjadi isyarat video di bawah kawalan urutan video, jadi anda boleh menonton video apabila isyarat video disambungkan ke monitor atau TV.

Prinsip dan komposisi sistem kamera pandangan belakang kereta CCD

Prinsip sistem kamera pandangan belakang kereta CCD: sistem kamera pandangan belakang kereta CCD adalah penambahbaikan daripada radar undur asal. Kamera kereta yang dipasang di bahagian belakang kereta mengambil gambar dan menghantar isyarat video ke paparan kereta berhampiran tempat pemandu melalui talian penghantaran, yang membolehkan pemandu melihat halangan di sekeliling bahagian belakang kereta dengan tepat pada masanya, memperluas pandangan pemandu, meningkatkan kecekapan keselamatan dan memastikan pemandu melakukan tindakan undur dengan selamat.

Komposisi sistem kamera pandangan belakang CCD untuk kereta: paparan kereta, kamera undur dan talian penghantaran.

Secara amnya, kamera pandangan belakang kereta CCD wujud untuk membolehkan pemandu melihat dengan jelas di belakang kereta supaya mereka dapat mengundur dengan selamat dan mengelakkan kecederaan pada orang yang lalu-lalang. .

Shenzhen Luview Co., Ltd adalah pengeluar profesional di China yang mengkhusus dalam pembangunan dan pembuatan kamera pandang belakang kereta CCD, kamera papan pemuka, monitor LCD dan produk kamera kereta lain. Jika anda berminat dengan produk kami, sila hubungi kami melalui e-mel: sales@luview.com.

Apakah kamera AHD dan kelebihannya?

10 Oktober 2017/dalam berita industri/oleh 卢维尤

AHD adalah singkatan bagi Analog High Definition, jadi kamera AHD ialah kamera definisi tinggi analog, dengan isyarat penghantaran adalah isyarat analog definisi tinggi. Apabila bercakap tentang definisi tinggi, secara ringkas, kami biasanya memanggil video definisi tinggi dengan resolusi fizikal melebihi 720p sebagai HD.

Teknologi AHD dapat mencapai penghantaran boleh dipercayai isyarat video definisi tinggi jarak ultra jauh (500 meter) pada talian penghantaran analog sedia ada. Ia menggunakan pemisahan isyarat Y/C dan penapisan simulasi canggih, yang dapat mengurangkan hingar warna dalam kawasan frekuensi tinggi dengan berkesan, menjadikan keupayaan pemampatan imej lebih baik. Berbanding dengan produk definisi tinggi tradisional, kualiti imej kamera AHD mengalami lonjakan kualitatif dan peningkatan, dengan kejelasan tertinggi setara dengan tahap HD 1080 penuh.

Kamera AHD ciri-ciri dan kelebihan:

lebih jelas: pemisahan warna cerah lanjutan, penapisan isyarat, teknologi pengurangan hingar 3D, kejelasan imej lebih tinggi, kebolehbacaan imej yang lebih baik; ;
jarak penghantaran: gunakan penghantaran koaksial, talian 75-5 biasa boleh menghantar sehingga 500 meter;
tanpa kelewatan: data yang dirakam dihantar ke monitor tanpa penyulitan, secara masa nyata dan dengan kesetiaan tinggi;
serasi: serasi dengan D1/960H biasa, serasi dengan periferal analog (termasuk pengedar, matriks, dan lain-lain);
Mudah dikendalikan: menyokong reka bentuk menu OSD, tetapkan mengikut kehendak anda;
Murah: harga simulasi biasa untuk produk berkualiti definisi tinggi;
integrasi tinggi: harga cip hadapan AHD untuk produk berkualiti definisi tinggi;
standard terbuka: standard terbuka untuk pihak ketiga, serasi dengan produk AHD pengeluar lain, mempercepat pembangunan pasaran.

Kamera AHD menggunakan kaedah mensimulasikan penghantaran definisi standard, yang dapat mengurangkan kerumitan pembinaan dan penyebaran, mengurangkan kos bahan bantu serta mengekalkan kerumitan dan keperluan teknikal kakitangan pembinaan. Ia amat sesuai untuk menaik taraf sistem lama; anda boleh dengan mudah menaik taraf daripada definisi standard ke definisi tinggi tanpa menukar sistem asal. Selain itu, kualiti definisi tinggi dengan harga definisi standard menjadikan kamera AHD mempunyai ruang pembangunan yang sangat luas dalam pasaran awam dan industri. (seperti kamera kereta AHD).